Part Numbers and Ordering
Evaluation Kit
| Part Number | Description | Notes |
|---|---|---|
| SUBSONUS-EK | Subsonus Evaluation Kit |
Subsonus Evaluation Kit Contains everything required to start operating Subsonus for subsea acoustic positioning. Includes items listed in |
| SUBSONUS-TAG-EK | Subsonus Tag Evaluation Kit |
Subsonus Tag Evaluation Kit Contains everything required to start operating Subsonus Tag for subsea acoustic positioning. Includes items listed in Subsonus Tag Evaluation Kit Contents |
Evaluation Kit Part Numbers
Standalone Units
| Part Number | Description | Notes |
|---|---|---|
| SUBSONUS-H | Subsonus with connector installed in horizontal port |
Typically best choice for mounting Subsonus close to a flat surface such as the top of a vehicle |
| SUBSONUS-V | Subsonus with connector installed in vertical port |
Typically best choice for mounting Subsonus on a pole |
Standalone Unit Part Numbers
Accessories
| Part Number | Description | Notes |
|---|---|---|
| SS-10M-CABLE | Subsonus 10 metre RJ45 cable | Subsonus 10 metre cable, RJ45 Ethernet connector to MCIL8F connector with cap |
| SS-3M-EXCABLE | Subsonus 3 metre extension cable | Subsonus 3 metre extension cable, MCIL8M connector to MCIL8F connector with caps |
| SS-20M-EXCABLE | Subsonus 20 metre extension cable | Subsonus 20 metre extension cable, MCIL8M connector to MCIL8F connector with caps |
| SS-80M-EXCABLE |
Subsonus 80 |
Subsonus 80 metre extension cable, MCIL8M connector to MCIL8F connectors with caps |
| SS-POLE-BRACKET | Subsonus Surface Pole Mount Bracket | Subsonus Surface Pole Mount Bracket |
| GC2-POE | GNSS Compass Ethernet Variant | GNSS Compass Ethernet variant Power over Ethernet interface Supports GPS, GLONASS, Galileo & BeiDou constellation L1/L2 10mm RTK Supports DGPS and SBAS Does not support L band No cables included |
| GC-POE-CABLE-20M | 20m Ethernet cable for GNSS Compass | 20m CAT5e Ethernet cable with RJ45
Compatible with Ethernet units only (G2C-POE) IP67 environmentally sealed connector |
| POE-INJECTOR-DC | DC PoE Injector | 24V DC PoE Injector 25W 802.3at Type 2 "PoE+" Requires 12/24V DC power supply (SUPPLY-24V or similar) |
| SUPPLY-24V | 24 V power supply |
100-240 V AC Mains to 24 V DC Power Supply (DC jack) Includes 2-pin plug types A/C/G/I |
Ordering Part Numbers for Accessories
Note: The 80m extension cable is subject to availability.